Support
Support

We Have All the Resources You Need

If you have any questions about HVAC services and want to get a deeper understanding, we suggest that you see the information below! We have defined some terms that are frequently used when discussing HVAC systems.

However, if you are still unsure what these terms are, there is no need to stress. If your air conditioning system has any issues, our air conditioning company can handle it. Just give us a call and we can take care of your AC repair. Even if you are not an HVAC expert, our professionals will do their best to explain what is wrong with your system and have the problem fixed in an efficient manner. Don’t let the Gulf Breeze or Pensacola, FL heat get to you and give us a call today.
AFUE

Annualized Fuel Utilization Efficiency is a measure of your furnace's heating efficiency. The higher the AFUE percentage, the more efficient the furnace. The minimum percentage established by the DOE for furnaces is 78%.

Airflow

The distribution or movement of air.

Air Handler/Coil Blower

The indoor part of an air conditioner or heat pump that moves cooled or heated air throughout the ductwork of your home. An air handler is usually a furnace or a blower coil.

Bioaerosols

Microscopic living organisms suspended in the air that grow and multiply in warm, humid places.

Btu

A British thermal unit is a unit of heat energy. One Btu is the amount of heat required to raise one pound of water by one degree Fahrenheit. The higher the Btu rating, the greater the heating capacity of the system.

Btuh

British thermal units per hour.

CAE

The Combined Annual Efficiency is a measure of the amount of heat produced for every dollar of fuel consumed for both home and water heating.

Carbon Monoxide

An odorless, colorless, tasteless, poisonous and flammable gas that is produced when carbon burns with insufficient air.

Central Air Conditioning System

System in which air is treated at a central location and distributed to and from rooms by one or more fans and a series of ducts.

CFM

Stands for Cubic Feet per Minute. This measurement indicates how many cubic feet of air pass by a stationary point in one minute. The higher the number, the more air is being moved through the ductwork by the system.

Compressor

The part of the outdoor air conditioner or heat pump that compresses and pumps refrigerant to meet household cooling requirements.

Condenser Coil

The outdoor portion of an air conditioner or heat pump that either releases or collects heat, depending on the time of the year.

Damper

A movable plate, located in the ductwork, that regulates airflow. Dampers are used to direct air to the areas that need it most. Typically used in a zoning application.

dB

A decibel is a unit used to measure the relative intensity of sound.

DOE

The Department of Energy is a federal agency responsible for setting industry efficiency standards and monitoring the consumption of energy sources.

Dual Fuel

A comfort system that pairs an electric heat pump with a gas furnace, providing an energy-efficient alternative to the conventional furnace/air conditioner combination.

Ductwork

The method by which air is channeled from the furnace or the blower coil throughout your home.

Electronic Air Cleaner

An electronic device that filters out large particles and bioaerosols in indoor air.

ENERGY STAR®

An EPA (Environmental Protection Agency) designation attached to HVAC products that meet or exceed EPA guidelines for high-efficiency performance above the standard government minimums.

EPA

The Environmental Protection Agency develops and enforces federal environmental regulations. The EPA oversees the nationwide Energy Star® program.

Evaporator Coil

The part of the air conditioner or heat pump that is located inside the air handler or attached to the furnace. Its primary function is to absorb the heat from the air in your house.

FAQ

Stands for "frequently asked questions."

Garage Heaters

Garage heaters are an excellent product for combating cold garages and workshops during the winter months. Heating capacities provide warmth for a 1 car garage up to a 4+ car garage application. Available in natural or propane gas, units should be installed by a Lennox dealer/installer.

Heat Exchanger

Located in the furnace, the heat exchanger transfers heat to the surrounding air, which is then pumped throughout the home.

Heat Pump

A heat pump is an HVAC unit that heats or cools by moving heat. During the winter, a heat pump draws heat from outdoor air and circulates it through your home's air ducts. In the summer, it reverses the process and removes heat from your house and releases it outdoors.

Horizontal Flow

When an air handler or furnace is positioned on its side and circulates air in one end and out the other. Ideal for attic or crawl space installations.
HSPF

The Heating Seasonal Performance Factor is the heating efficiency rating for heat pumps. The higher the rating, the more efficient the heat pump. HSPF will be regulated in 2006 at 7.7.

Humidifier

An indoor air quality device that introduces moisture to heated air as it passes from the furnace into the ductwork for distribution throughout the home.

Humidistat

An automatic device used to maintain humidity at a fixed or adjustable set point.

HVAC

Heating, Ventilation and Air Conditioning.

Indoor Coil

See Evaporator Coil.

IISO 9000

A family of international standards for quality management and assurance.

MERV Rating

The MERV (Minimum Efficiency Reporting Value) rating of a filter describes the size of the holes in the filter that allow air to pass through. The higher the MERV rating, the smaller the holes in the filter, the higher the efficiency.

Micron

A unit of measure equal to one millionth of a meter, or one thousandth of a millimeter.

Odors/Chemicals

Air contaminants in the form of gases.

Outdoor Coil

See Condenser Coil.

Particles

Any substances measuring less than 100 microns in diameter. The EPA has found that small particles (less than 2.5 microns) are responsible for the health effects of greatest concern.

Programmable Thermostat

A thermostat with the ability to record different temperature/time settings for your heating and/or cooling equipment.

R410A Refrigerant

A chlorine-free refrigerant that meets the EPA's newest, most stringent environmental guidelines.

Refrigerant

A chemical that produces a cooling effect while expanding or vaporizing. Most residential air conditioning units contain the standard R-22 refrigerant, or Freon.

Refrigerant Lines

Two copper lines that connect the outdoor air conditioner or heat pump to the indoor evaporator coil.

Scroll Compressor

A specially designed compressor that works in a circular motion, as opposed to up-and-down piston action.

SEER

The Seasonal Energy Efficiency Ratio is an energy efficiency rating for air conditioners. The higher the SEER, the better the energy performance, the more you save. The DOE's established minimum SEER rating for cooling is 13.00.

Single Package

A heating and cooling system contained in one outdoor unit.

Split System

An HVAC system in which some components are located inside the structure of the house and some are located outside. Split systems should be matched for optimal efficiency.

Thermidistat

Monitors temperature and humidity and adjusts heating or cooling system to maintain desired levels.

Thermostat

Usually found on an inside wall, this device operates as a control to regulate your heating and cooling equipment, allowing you to adjust your home comfort at the touch of a switch.

Ton

Unit of measurement for determining cooling capacity. One ton equals 12,000 Btuh.

Two-Stage Operation

Provides two levels of heating or cooling output for greater temperature control, energy efficiency and improved indoor air quality.

Upflow

When an air handler or furnace is installed in an upright position and circulates air through the side or bottom and out through the top. Typically used in basement, closet and attic installations.

Variable Speed Motor

A motor that automatically adjusts the flow of warm or cool air for ultimate comfort.

Ventilator

A system that exchanges stale, recirculated indoor air with fresh, filtered outside air.

Zoning

A method of partitioning a home into independently controlled comfort zones for enhanced comfort and efficiency.
10 Tips for Selecting an HVAC Company! 
  1. Before making a decision, it is important to check the credentials of the company you may be working with. We suggest you reach out to the Better Business Bureau to make sure the company can be trusted. It is also important to see if the company is a member of any local or national associations.

  2. You should make sure the company is affiliated with a nationally known manufacturer. Companies should also get the factory training offered by the manufacturer. When they do get the proper training, you can rest assured you will get the correct unit size and that the installation will be performed properly.
     
  3. It is suggested to get references from past customers or request installation photos. A company that is proud of its work will be happy to provide this information. 

  4. Get an on-site evaluation/estimate. The company you choose should do a thorough check of your home and ask questions to get a feel for the situation. 

  5. Depending on where you live, companies will more times than not have to comply with local or state regulations. We suggest you ask to see their licenses along with any insurance forms for liability and workers' compensation.

  6. Always ask questions. It is a good rule of thumb to ask about the company’s experience and the knowledge that its staff has. 

  7. You should always look to get a written proposal. When you are comparing proposals from several companies, we suggest that they are based on the same work being accomplished. It is also important to look into every dealer's business standards and policies. It is important to ask questions like: will they remove old equipment? Will they relocate equipment if you want your new system installed in a different location? Do they handle emergency repairs? What are their clean up policies during installation? These are just a few of the additional elements a good proposal will include.

  8. Ask about equipment and labor warranties. Limited warranties are different based on the manufacturer, so make sure your aware of what you’re getting. Don't forget to ask about manufacturer's extended warranties at the time of purchase and other warranties that the dealer provides.

  9. Learn more about preventative maintenance service agreements. Many companies offer service agreements that call for periodic maintenance of equipment and repair work. The cost of these agreements is usually well worth the expense in terms of getting the best efficiency and performance for your system.

  10. And lastly, make sure to get a written agreement. Commit your agreement to writing and have the dealer sign it.
Share by: